we provide Approved Microsoft az-500 actual test which are the best for clearing az-500 test, and to get certified by Microsoft Microsoft Azure Security Technologies. The az-500 Questions & Answers covers all the knowledge points of the real az-500 exam. Crack your Microsoft az-500 Exam with latest dumps, guaranteed!

Free demo questions for Microsoft az-500 Exam Dumps Below:

NEW QUESTION 1
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain.
You have an Azure subscription named Sub1 that is associated to an Azure Active Directory (Azure AD) tenant named contoso.com. You plan to deploy Azure AD Connect and to integrate Active Directory and the Azure AD tenant.
You need to recommend an integration solution that meets the following requirements:
AZ-500 dumps exhibitEnsures that password policies and user logon restrictions apply to user accounts that are synced to the tenant Minimizes the number of servers required for the solution.
Which authentication method should you include in the recommendation?

  • A. federated identity with Active Directory Federation Services (AD FS)
  • B. password hash synchronization with seamless single sign-on (SSO)
  • C. pass-through authentication with seamless single sign-on (SSO)

Answer: B

Explanation:
Password hash synchronization requires the least effort regarding deployment, maintenance, and infrastructure. This level of effort typically applies to organizations that only need their users to sign in to Office 365, SaaS apps, and other Azure AD-based resources. When turned on, password hash synchronization is part of the Azure AD Connect sync process and runs every two minutes.
Incorrect Answers:
A: A federated authentication system relies on an external trusted system to authenticate users. Some companies want to reuse their existing federated system investment with their Azure AD hybrid identity solution. The maintenance and management of the federated system falls outside the control of Azure AD. It's up to the organization by using the federated system to make sure it's deployed securely and can handle the authentication load.
C: For pass-through authentication, you need one or more (we recommend three) lightweight agents installed on existing servers. These agents must have access to your on-premises Active Directory Domain Services, including your on-premises AD domain controllers. They need outbound access to the Internet and access to your domain controllers. For this reason, it's not supported to deploy the agents in a perimeter network.
Pass-through Authentication requires unconstrained network access to domain controllers. All network traffic is encrypted and limited to authentication requests.
References:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-pta

NEW QUESTION 2
You create a new Azure subscription.
You need to ensure that you can create custom alert rules in Azure Security Center. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

  • A. Onboard Azure Active Directory (Azure AD) Identity Protection.
  • B. Create an Azure Storage account.
  • C. Implement Azure Advisor recommendations.
  • D. Create an Azure Log Analytics workspace.
  • E. Upgrade the pricing tier of Security Center to Standard.

Answer: BD

Explanation:
D: You need write permission in the workspace that you select to store your custom alert.
References:
https://docs.microsoft.com/en-us/azure/security-center/security-center-custom-alert

NEW QUESTION 3
You are testing an Azure Kubernetes Service (AKS) cluster. The cluster is configured as shown in the exhibit. (Click the Exhibit tab.)
AZ-500 dumps exhibit
You plan to deploy the cluster to production. You disable HTTP application routing.
You need to implement application routing that will provide reverse proxy and TLS termination for AKS services by using a single IP address. What should you do?

  • A. Create an AKS Ingress controller.
  • B. Install the container network interface (CNI) plug-in.
  • C. Create an Azure Standard Load Balancer.
  • D. Create an Azure Basic Load Balancer.

Answer: A

Explanation:
An ingress controller is a piece of software that provides reverse proxy, configurable traffic routing, and TLS termination for Kubernetes services.
References:
https://docs.microsoft.com/en-us/azure/aks/ingress-tls

NEW QUESTION 4
You need to configure WebApp1 to meet the data and application requirements.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

  • A. Upload a public certificate.
  • B. Turn on the HTTPS Only protocol setting.
  • C. Set the Minimum TLS Version protocol setting to 1.2.
  • D. Change the pricing tier of the App Service plan.
  • E. Turn on the Incoming client certificates protocol setting.

Answer: AC

Explanation:
A: To configure Certificates for use in Azure Websites Applications you need to upload a public Certificate.
C: Over time, multiple versions of TLS have been released to mitigate different vulnerabilities. TLS 1.2 is the most current version available for apps running on Azure App Service.
Incorrect Answers:
B: We need support the http url as well.
Note:
AZ-500 dumps exhibit
References:
https://docs.microsoft.com/en-us/azure/app-service/app-service-web-configure-tls-mutual-auth
https://azure.microsoft.com/en-us/updates/app-service-and-functions-hosted-apps-can-now-update-tls-versions/

NEW QUESTION 5
DRAG DROP
You need to configure an access review. The review will be assigned to a new collection of reviews and reviewed by resource owners.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Step 1: Create an access review program Step 2: Create an access review control
Step 3: Set Reviewers to Group owners
In the Reviewers section, select either one or more people to review all the users in scope. Or you can select to have the members review their own access. If the resource is a group, you can ask the group owners to review.
AZ-500 dumps exhibit
References:
https://docs.microsoft.com/en-us/azure/active-directory/governance/create-access-review
https://docs.microsoft.com/en-us/azure/active-directory/governance/manage-programs-controls

NEW QUESTION 6
Your company has an Azure subscription named Sub1 that is associated to an Azure Active Directory Azure (Azure AD) tenant named contoso.com.
The company develops a mobile application named App1. App1 uses the OAuth 2 implicit grant type to acquire Azure AD access tokens. You need to register App1 in Azure AD.
What information should you obtain from the developer to register the application?

  • A. a redirect URI
  • B. a reply URL
  • C. a key
  • D. an application ID

Answer: A

Explanation:
For Native Applications you need to provide a Redirect URI, which Azure AD will use to return token responses.
References:
https://docs.microsoft.com/en-us/azure/active-directory/develop/v1-protocols-oauth-code

NEW QUESTION 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Subscription named Sub1.
You have an Azure Storage account named Sa1 in a resource group named RG1.
Users and applications access the blob service and the file service in Sa1 by using several shared access signatures (SASs) and stored access policies. You discover that unauthorized users accessed both the file service and the blob service.
You need to revoke all access to Sa1. Solution: You generate new SASs. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation:
Instead you should create a new stored access policy.
To revoke a stored access policy, you can either delete it, or rename it by changing the signed identifier. Changing the signed identifier breaks the associations between any existing signatures and the stored access policy. Deleting or renaming the stored access policy immediately affects all of the shared access signatures associated with it.
References:
https://docs.microsoft.com/en-us/rest/api/storageservices/Establishing-a-Stored-Access-Policy

NEW QUESTION 8
HOTSPOT
You have Azure virtual machines that have Update Management enabled. The virtual machines are configured as shown in the following table.
AZ-500 dumps exhibit
You schedule two update deployments named Update1 and Update2. Update1 updates VM3. Update2 updates VM6.
Which additional virtual machines can be updated by using Update1 and Update2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Update1: VM1 and VM2 only
VM3: Windows Server 2016 West US RG2
Update2: VM4 and VM5 only VM6: CentOS 7.5 East US RG1
For Linux, the machine must have access to an update repository. The update repository can be private or public. References:
https://docs.microsoft.com/en-us/azure/automation/automation-update-management

NEW QUESTION 9
DRAG DROP
You create an Azure subscription.
You need to ensure that you can use Azure Active Directory (Azure AD) Privileged Identity Management (PIM) to secure Azure AD roles.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Step 1: Consent to PIM
AZ-500 dumps exhibit
Step: 2 Verify your identity by using multi-factor authentication (MFA)
Click Verify my identity to verify your identity with Azure MFA. You'll be asked to pick an account.
Step 3: Sign up PIM for Azure AD roles
Once you have enabled PIM for your directory, you'll need to sign up PIM to manage Azure AD roles.
References:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-getting-started

NEW QUESTION 10
Your network contains an on-premises Active Directory domain named corp.contoso.com.
You have an Azure subscription named Sub1 that is associated to an Azure Active Directory (Azure AD) tenant named contoso.com. You sync all on-premises identities to Azure AD.
You need to prevent users who have a givenName attribute that starts with TEST from being synced to Azure AD. The solution must minimize administrative effort. What should you use?

  • A. Synchronization Rules Editor
  • B. Web Service Configuration Tool
  • C. the Azure AD Connect wizard
  • D. Active Directory Users and Computers

Answer: A

Explanation:
Use the Synchronization Rules Editor and write attribute-based filtering rule.
References:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-sync-change-the-configuration

NEW QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a hybrid configuration of Azure Active Directory (AzureAD). You have an Azure HDInsight cluster on a virtual network.
You plan to allow users to authenticate to the cluster by using their on-premises Active Directory credentials. You need to configure the environment to support the planned authentication.
Solution: You create a site-to-site VPN between the virtual network and the on-premises network. Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

Explanation:
You can connect HDInsight to your on-premises network by using Azure Virtual Networks and a VPN gateway.
AZ-500 dumps exhibitNote: To allow HDInsight and resources in the joined network to communicate by name, you must perform the following actions: Create Azure Virtual Network.
AZ-500 dumps exhibitCreate a custom DNS server in the Azure Virtual Network.
AZ-500 dumps exhibitConfigure the virtual network to use the custom DNS server instead of the default Azure Recursive Resolver. Configure forwarding between the custom DNS server and your on-premises DNS server.
References:
https://docs.microsoft.com/en-us/azure/hdinsight/connect-on-premises-network

NEW QUESTION 12
HOTSPOT
You have an Azure subscription named Sub1.
You create a virtual network that contains one subnet. On the subnet, you provision the virtual machines shown in the following table.
AZ-500 dumps exhibit
Currently, you have not provisioned any network security groups (NSGs). You need to implement network security to meet the following requirements:
AZ-500 dumps exhibitAllow traffic to VM4 from VM3 only.
AZ-500 dumps exhibitAllow traffic from the Internet to VM1 and VM2 only. Minimize the number of NSGs and network security rules.
How many NSGs and network security rules should you create? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
NSGs: 2
Network security rules: 3
Not 2: You cannot specify multiple service tags or application groups) in a security rule.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/security-overview

NEW QUESTION 13
HOTSPOT
You have the Azure Information Protection conditions shown in the following table.
AZ-500 dumps exhibit
You have the Azure Information Protection labels shown in the following table.
AZ-500 dumps exhibit
You need to identify how Azure Information Protection will label files.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: Label 2 only
How multiple conditions are evaluated when they apply to more than one label
1. The labels are ordered for evaluation, according to their position that you specify in the policy: The label positioned first has the lowest position (least sensitive) and the label positioned last has the highest position (most sensitive).
2. The most sensitive label is applied.
3. The last sublabel is applied.
Box 2: No Label
Automatic classification applies to Word, Excel, and PowerPoint when documents are saved, and apply to Outlook when emails are sent. Automatic classification does not apply to Microsoft Notepad.
References:
https://docs.microsoft.com/en-us/azure/information-protection/configure-policy-classification

NEW QUESTION 14
HOTSPOT
You need to create an Azure key vault. The solution must ensure that any object deleted from the key vault be retained for 90 days.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: -EnablePurgeProtection
If specified, protection against immediate deletion is enabled for this vault; requires soft delete to be enabled as well.
Box 2: -EnableSoftDelete
Specifies that the soft-delete functionality is enabled for this key vault. When soft-delete is enabled, for a grace period, you can recover this key vault and its contents after it is deleted.
References:
https://docs.microsoft.com/en-us/powershell/module/azurerm.keyvault/new-azurermkeyvault

NEW QUESTION 15
HOTSPOT
Your company has two offices in Seattle and New York. Each office connects to the Internet by using a NAT device. The offices use the IP addresses shown in the following table.
AZ-500 dumps exhibit
The company has an Azure Active Directory (Azure AD) tenant named contoso.com. The tenant contains the users shown in the following table.
AZ-500 dumps exhibit
The MFA service settings are configured as shown in the exhibit. (Click the Exhibit tab.)
AZ-500 dumps exhibit
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 2: No
Use of Microsoft Authenticator is not required.
Note: Microsoft Authenticator is a multifactor app for mobile devices that generates time-based codes used during the Two-Step Verification process. Box 3: No
The New York IP address subnet is included in the "skip multi-factor authentication for request.
References:
https://www.cayosoft.com/difference-enabling-enforcing-mfa/

NEW QUESTION 16
DRAG DROP
You have an Azure subscription that contains 100 virtual machines. Azure Diagnostics is enabled on all the virtual machines. You are planning the monitoring of Azure services in the subscription.
You need to retrieve the following details:
AZ-500 dumps exhibitIdentify the user who deleted a virtual machine three weeks ago.
AZ-500 dumps exhibitQuery the security events of a virtual machine that runs Windows Server 2016.
What should you use in Azure Monitor? To answer, drag the appropriate configuration settings to the correct details. Each configuration setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box1: Activity log
Azure activity logs provide insight into the operations that were performed on resources in your subscription. Activity logs were previously known as “audit logs” or
“operational logs,” because they report control-plane events for your subscriptions.
Activity logs help you determine the “what, who, and when” for write operations (that is, PUT, POST, or DELETE). Box 2: Logs
Log Integration collects Azure diagnostics from your Windows virtual machines, Azure activity logs, Azure Security Center alerts, and Azure resource provider logs. This integration provides a unified dashboard for all your assets, whether they're on-premises or in the cloud, so that you can aggregate, correlate, analyze, and alert for security events.
References:
https://docs.microsoft.com/en-us/azure/security/azure-log-audit
Testlet 1
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next sections of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Litware, Inc. is a digital media company that has 500 employees in the Chicago area and 20 employees in the San Francisco area.
Existing Environment
Litware has an Azure subscription named Sub1 that has a subscription ID of 43894a43-17c2-4a39-8cfc-3540c2653ef4.
Sub1 is associated to an Azure Active Directory (Azure AD) tenant named litwareinc.com. The tenant contains the user objects and the device objects of all the Litware employees and their devices. Each user is assigned an Azure AD Premium P2 license. Azure AD Privileged Identity Management (PIM) is activated.
The tenant contains the groups shown in the following table.
AZ-500 dumps exhibit
The Azure subscription contains the objects shown in the following table.
AZ-500 dumps exhibit
Azure Security Center is set to the Free tier.
Planned changes
Litware plans to deploy the Azure resources shown in the following table.
AZ-500 dumps exhibit
Litware identifies the following identity and access requirements:
AZ-500 dumps exhibitAll San Francisco users and their devices must be members of Group1.
AZ-500 dumps exhibitThe members of Group2 must be assigned the Contributor role to Resource Group2 by using a permanent eligible assignment.
AZ-500 dumps exhibitUsers must be prevented from registering applications in Azure AD and from consenting to applications that access company information on the users’ behalf.
Platform Protection Requirements
Litware identifies the following platform protection requirements:
AZ-500 dumps exhibitMicrosoft Antimalware must be installed on the virtual machines in Resource Group1.
AZ-500 dumps exhibitThe members of Group2 must be assigned the Azure Kubernetes Service Cluster Admin Role. Azure AD users must be to authenticate to AKS1 by using their Azure AD credentials.
AZ-500 dumps exhibitFollowing the implementation of the planned changes, the IT team must be able to connect to VM0 by using JIT VM access.
AZ-500 dumps exhibitA new custom RBAC role named Role1 must be used to delegate the administration of the managed disks in Resource Group1. Role1 must be available only for Resource Group1.
Security Operations Requirements
Litware must be able to customize the operating system security configurations in Azure Security Center.

NEW QUESTION 17
HOTSPOT
What is the membership of Group1 and Group2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: User1, User2, User3, User4
Contains "ON" is true for Montreal (User1), MONTREAL (User2), London (User 3), and Ontario (User4) as string and regex operations are not case sensitive.
Box 2: Only User3
Match "*on" is only true for London (User3).
Scenario:
Contoso.com contains the users shown in the following table.
AZ-500 dumps exhibit
Contoso.com contains the security groups shown in the following table.
AZ-500 dumps exhibit
References:
https://docs.microsoft.com/en-us/azure/active-directory/users-groups-roles/groups-dynamic-membership

NEW QUESTION 18
You need to ensure that User2 can implement PIM.
What should you do first?

  • A. Assign User2 the Global administrator role.
  • B. Configure authentication methods for contoso.com.
  • C. Configure the identity secure score for contoso.com.
  • D. Enable multi-factor authentication (MFA) for User2.

Answer: A

Explanation:
To start using PIM in your directory, you must first enable PIM.
1. Sign in to the Azure portal as a Global Administrator of your directory.
You must be a Global Administrator with an organizational account (for example, @yourdomain.com), not a Microsoft account (for example, @outlook.com), to enable PIM for a directory.
Scenario: Technical requirements include: Enable Azure AD Privileged Identity Management (PIM) for contoso.com References:
https://docs.microsoft.com/bs-latn-ba/azure/active-directory/privileged-identity-management/pim-getting-started

NEW QUESTION 19
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Subscription named Sub1.
You have an Azure Storage account named Sa1 in a resource group named RG1.
Users and applications access the blob service and the file service in Sa1 by using several shared access signatures (SASs) and stored access policies. You discover that unauthorized users accessed both the file service and the blob service.
You need to revoke all access to Sa1.
Solution: You create a new stored access policy. Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

Explanation:
To revoke a stored access policy, you can either delete it, or rename it by changing the signed identifier. Changing the signed identifier breaks the associations between any existing signatures and the stored access policy. Deleting or renaming the stored access policy immediately effects all of the shared access signatures associated with it.
References:
https://docs.microsoft.com/en-us/rest/api/storageservices/Establishing-a-Stored-Access-Policy

NEW QUESTION 20
DRAG DROP
Your company has an Azure Active Directory (Azure AD) tenant named contoso.com.
The company is developing an application named App1. App1 will run as a service on server that runs Windows Server 2016. App1 will authenticate to contoso.com and access Microsoft Graph to read directory data.
You need to delegate the minimum required permissions to App1.
Which three actions should you perform in sequence from the Azure portal? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Step 1: Create an app registration
First the application must be created/registered.
Step 2: Add an application permission
Application permissions are used by apps that run without a signed-in user present.
Step 3: Grant permissions
Incorrect Answers: Delegated permission
Delegated permissions are used by apps that have a signed-in user present.
Application Proxy:
Azure Active Directory's Application Proxy provides secure remote access to on-premises web applications.
References:
https://docs.microsoft.com/en-us/azure/active-directory/develop/v2-permissions-and-consent

NEW QUESTION 21
You need to ensure that you can meet the security operations requirements.
What should you do first?

  • A. Turn on Auto Provisioning in Security Center.
  • B. Integrate Security Center and Microsoft Cloud App Security.
  • C. Upgrade the pricing tier of Security Center to Standard.
  • D. Modify the Security Center workspace configuration.

Answer: C

Explanation:
The Standard tier extends the capabilities of the Free tier to workloads running in private and other public clouds, providing unified security management and threat protection across your hybrid cloud workloads. The Standard tier also adds advanced threat detection capabilities, which uses built-in behavioral analytics and machine learning to identify attacks and zero-day exploits, access and application controls to reduce exposure to network attacks and malware, and more.
Scenario: Security Operations Requirements
Litware must be able to customize the operating system security configurations in Azure Security Center. References:
https://docs.microsoft.com/en-us/azure/security-center/security-center-pricing
Question Set 3

NEW QUESTION 22
You are configuring an Azure Kubernetes Service (AKS) cluster that will connect to an Azure Container Registry.
You need to use the auto-generated service principal to authenticate to the Azure Container Registry. What should you create?

  • A. an Azure Active Directory (Azure AD) group
  • B. an Azure Active Directory (Azure AD) role assignment
  • C. an Azure Active Directory (Azure AD) user
  • D. a secret in Azure Key Vault

Answer: B

Explanation:
When you create an AKS cluster, Azure also creates a service principal to support cluster operability with other Azure resources. You can use this auto-generated service principal for authentication with an ACR registry. To do so, you need to create an Azure AD role assignment that grants the cluster's service principal access to the container registry.
References:
https://docs.microsoft.com/bs-latn-ba/azure/container-registry/container-registry-auth-aks

NEW QUESTION 23
......

Thanks for reading the newest az-500 exam dumps! We recommend you to try the PREMIUM Surepassexam az-500 dumps in VCE and PDF here: https://www.surepassexam.com/az-500-exam-dumps.html (58 Q&As Dumps)