We provide real 352-001 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco 352-001 Exam quickly & easily. The 352-001 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco 352-001 dumps pdf and vce product and material, you can easily pass the 352-001 exam.

Q41. Your company plans to implement an Internet gateway router that is performing NAT. This same gateway will be terminating various IPsec tunnels to other remote sites. Which 

address type isappropriate for the ACL that will govern the sources of traffic entering the tunnel in the inside interface? 

A. inside local 

B. inside global 

C. outside local 

D. outside global 

Answer:


Q42. You have been hired by a startup company to provide optical services using MPLS-TP. Which three options describe reasons to use the MPLS-TP standard in your design? (Choose three.) 

A. MPLS-TP is a newer packet transport technology that replaces SONET/SDH. 

B. MPLS-TP includes extensions to native MPLS OAM for fault detection, monitoring, and propagation. 

C. MPLS-TP requires a routing protocol. 

D. MPLS-TP uses an IANA assigned label 13 for OAM. 

E. MPLS-TP uses Ethernet Y.1731 OAM. 

Answer: ABD 


Q43. Refer to the exhibit. 

Your junior design engineer presents this configuration design. What is the next-hop router for CE3, and why? 

A. CE1. BGP weight is higher than CE2. 

B. CE2. EBGP administrative distance is lower than RIP. 

C. CE2. The link between CE2 and PE1 has more bandwidth than CE1-to-PE1. 

D. CE1. HSRP on CE1 is in active state. 

Answer:


Q44. You are the lead network designer for an enterprise company called ABC, and you are leading design discussions regarding IPv6 implementation into their existing network. A question is raised regarding older Layer 2 switches that exist in the network, and if any changes are required to these Layer 2 switches for successful IPv6 implementation. Which two responses should you give? (Choose two.) 

A. IPv6 is transparent on Layer 2 switches, so there is no need to make any changes to the Layer 2 switches. 

B. If IPv6 anycast deployment is planned, then make sure that Layer 2 switches support ICMPv6 snooping at Layer 2 switches. 

C. If IPv6 anycast deployment is planned, then make sure that Layer 2 switches support DHCPv6 snooping at Layer 2 switches. 

D. If IPv6 multicast deployment is planned, then make sure that Layer 2 switches support MLD snooping at Layer 2 switches. 

E. If IPv6 anycast deployment is planned, then make sure that Layer 2 switches support ND snooping at Layer 2 switches. 

Answer: AD 


Q45. Which two aspects are considered when designing a dual hub, dual DMVPN cloud topology? (Choose two.) 

A. recommended for high availability 

B. requires all sites to have dual Internet connections C. spoke-to-spoke traffic will transit the hub unless spokes exchange dynamic routing directly 

D. hub sites must connect to both DMVPN clouds 

E. will only work with single-tier headend architecture 

Answer: AE 


Q46. You are the lead network designer hired by Service Provider XYZ to deploy CoS functionality on the core MPLS network (P routers). The goal of the network design is to provide a complete CoS solution to all customers that purchase services such as dedicated internet access, MPLS L3VPN, and L2VPN (pseudowire). Service Provider XYZ has these design requirements: 

The network supports four service queues with equal treatment for delay, jitter, and packet loss. 

Queues are numbered 0-3, where 0 is the default queue. 

Three queues have one treatment. 

One queue has either one or two treatments. 

How would you design your solution to map the DSCP value properly so that the traffic is assigned to the respective queues in the Service Provider XYZ MPLS core network? 

A. Classify traffic according to DSCP value into appropriate P router queues. 

B. Map the appropriate DSCP value into the EXP field based on the number of queues in the MPLS P routers. 

C. Map the appropriate DSCP value into the EXP field based on the number of queues in the MPLS PE routers. 

D. Based on the DSCP value, traffic is mapped automatically into appropriate queues in the MPLS CE routers. 

Answer:


Q47. In a redesign of a multiple-area network, it is recommended that summarization is to be implemented. For redundancy requirements, summarization is done at multiple locations for each summary. Some customers now complain of higher latency and performance issues for a server hosted in the summarized area. What design issues should be considered when creating the summarization? 

A. Summarization adds CPU overhead on the routers sourcing the summarized advertisement. 

B. Summarization prevents the visibility of the metric to the component subnets. 

C. Summarization creates routing loops. 

D. Summarization causes packet loss when RPF is enabled. 

Answer:


Q48. Acme Corporation indicates that their network design must support the ability to scale to support a high number of remote sites. Which IGP is considered to scale better for a hub-and-spoke topology? 

A. BGP 

B. OSPF 

C. IS-IS 

D. EIGRP 

Answer:


Q49. Your company needs to baseline web traffic on a per-session basis for network application reporting. Which two mechanisms, when combined, fulfill the requirement? (Choose two.) 

A. Flexible Netflow 

B. Remote Monitoring 

C. Cisco IOS IP Service Level Agreement 

D. Class-Based Quality of Service Management Information Base 

E. Network-Based Application Recognition 

Answer: AE 


Q50. What are two benefits of following a structured hierarchical and modular design? (Choose two.) 

A. Each component can be designed independently for its role. 

B. Each component can be managed independently based on its role. 

C. Each component can be funded by different organizations based on its role. 

D. Each component can support multiple roles based on the requirements. 

E. Each component can provide redundancy for applications and services. 

Answer: AB