It is impossible to pass Cisco 300-365 exam without any help in the short term. Come to Actualtests soon and find the most advanced, correct and guaranteed Cisco 300-365 practice questions. You will get a surprising result by our Update Deploying Cisco Wireless Enterprise Networks practice guides.

Q21. An engineer used an interface group under the SSID configuration, but noticed that a test client is getting an IP assigned in a different VLAN from the DHCP server. Which two options override the interface group configuration on the SSID? (Choose two.) 

A. static VLAN on client 

B. ACL 

C. AP group 

D. static IP on client 

E. MAC filtering 

F. RF group 

G. AAA override 

Answer: C,G 


Q22. A wireless engineer wants to enable optimized roaming for their 5GHz wireless network with these settings: -72dBm RSSI value, 25% coverage exception level percentage, and a minimum of 50 packets received. 

Which two commands achieve these settings? (Choose two.) 

A. config advanced 802.11a coverage data fail-percentage 25 

B. config advanced 802.11b optimized-roaming enable 

C. config advanced 802.11b coverage data rssi-threshold -72 

D. config advanced 802.11a optimized-roaming enable 

E. config advanced 802.11a coverage data rssi-threshold -72 

Answer: A,D 


Q23. Which two options are limitations of using an AP as a workgroup bridge? (Choose two.) 

A. Only factory-configured MAPs can support WGB mode. 

B. MAPs that are configured in WGB mode do not answer S36 radio measurement requests. 

C. A limited subset of Layer 2 security types are supported for wireless clients of a WGB. 

D. There is a limit of 20 wired client devices. 

E. Multiple VLANs are not supported for wireless clients. 

Answer: B,D 


Q24. What is the default NMSP echo interval between a Mobility Services Engine and Wireless LAN Controller? 

A. 30Seconds 

B. 15 Seconds 

C. 10 Seconds 

D. 60 Seconds 

Answer:


Q25. A customer requires that the remote site be able to utilize local servers when the AP is in WAN-down (standalone mode). Which AP mode must be configured on the wireless controller? 

A. SE-Connect 

B. Monitor 

C. Local 

D. FlexConnect 

E. Sniffer 

F. Rogue Detector 

Answer:


Q26. A downstream packet containing a DSCP value arrives at the WLC Ethernet interface from the wired source network. The WLC is configured for QoS WLAN 802.1p mapping. How does the WLC treat the CAPWAP QoS marking when leaving the controller interface for the respective AP and final wireless client destination? 

A. No outer CAPWAP or inner QoS tagging is applied. 

B. No outer CAPWAP QoS tag is applied, but the original DSCP is maintained inside CAPWAP. 

C. The outer CAPWAP CoS is marked and capped while the inner DSCP maintains the original marking. 

D. The outer CAPWAP DHCP is marked and capped without any inner DSCP value. 

Answer:


Q27. Controllers WLC_1 and WLC_2 are in the same mobility group. A wireless client that does not have the same VLAN interface roams from WLC_1 to WLC_2. What happens to the client roaming? 

A. The client context is deleted in controller WLC_1, and a new client context is created in WLC_2 to become the anchor controller 

B. The client context is moved from controller WLC_1 to controller WLC_2. The result is that the WLC_1 client context is deleted and WLC_2 becomes the anchor controller. 

C. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the foreign controller and WLC_2 becomes the anchor controller. 

D. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the anchor controller and WLC_2 becomes the foreign controller. 

Answer:


Q28. A customer has "quiet" wireless clients that use static IP addresses. Which two WLAN configurations are required for these wireless clients to connect properly? (Choose two.) 

A. Disable DHCP address assignment required. 

B. Enable passive client. 

C. Disable allow AAA override. 

D. Enable static IP tunneling. 

E. Disable DHCP server override. 

Answer: A,E 


Q29. By default, how long does a Mobility Services Engine wait for an echo response from a Wireless LAN Controller before declaring the neighbor dead? 

A. 10 Seconds 

B. 60 Seconds 

C. 15 Seconds 

D. 30 Seconds 

Answer:


Q30. RAG DROP 

Drag the QoS values from the left and drop them in the correct descending order of priority on the right. 

Answer: