Proper study guides for Update Cisco ROUTE Implementing Cisco IP Routing certified begins with Cisco 300 101 vce preparation products which designed to deliver the Highest Quality 300 101 vce questions by making you pass the 9tut ccnp 300 101 test at your first time. Try the free ccnp routing and switching route 300 101 official cert guide demo right now.

P.S. Highest Quality 300-101 dump are available on Google Drive, GET MORE: https://drive.google.com/open?id=1CwAEJEbFmyl4ZmUUqpfpE03ZrSQ7-7CS


New Cisco 300-101 Exam Dumps Collection (Question 12 - Question 21)

Question No: 12

A network engineer wants an NTP clients to be able to update the local system without updating or synchronizing with the remote system. Which option for the ntp access-group command is needed to accomplish this?

A. serve

B. query-only

C. serve-only

D. peer

Answer: A


Question No: 13

A network engineer wants to notify a manager in the events that the IP SLA connection loss threshold reached. Which two feature are need to implements this functionality? (choose two)

A. MOS

B. Threshold action

C. Cisco IOS EEM

D. SNMP traps

E. logging local

Answer: B,D


Question No: 14

Which alerts will be seen on the console when running the command: logging console warnings.?

A. warnings only

B. warnings, notifications, error, debugging, informational

C. warnings, errors, critical, alerts, emergencies

D. notifications, warnings, errors

E. warnings, errors, critical, alerts

Answer: C


Question No: 15

Refer to the exhibit. Which statement about the command output is true?

A. The router exports flow information to 10.10.10.1 on UDP port 5127.

B. The router receives flow information from 10.10.10.2 on UDP port 5127.

C. The router exports flow information to 10.10.10.1 on TCP port 5127.

D. The router receives flow information from 10.10.10.2 on TCP port 5127.

Answer: A


Question No: 16

A policy needs to be implemented on Router B so that any traffic sourced from 172.16.10.0/24 will be forwarded to Router C.

Which configuration on Router B will achieve the desired effect?

A. access-list 1 permit 172.16.10.0 0.0.0.255!interface s0ip policy route-map policy!route-

map policy permit 10match ip address 1set ip next-hop 172.16.12.3

B. access-list 1 permit 172.16.10.0 0.0.0.255!interface e0ip policy route-map policy!route- map policy permit 10match ip address 1set ip next-hop 172.16.12.2

C. access-list 1 permit 172.16.10.0 0.0.0.255!interface e0ip policy route-map policy!route- map policy permit 10match ip address 1set ip next-hop 172.16.14.4

D. access-list 1 deny 172.16.10.0 0.0.0.255!interface s0ip policy route-map policy!route- map policy permit 10match ip address 1set ip next-hop 172.16.12.2

Answer: A

Explanation:

The u201cnext-hopu201d IP address should be the E1 interface of router C (172.16.12.3).


Question No: 17

A network engineer is troubleshooting connectivity issues with a directly connected RIPng neighbor. Which command should directly connected RIPng neighbor adjacencies only?

A. router#show ipv6 rip next-hops

B. router#show ip rip neighbors

C. router#show ipv6 routers

D. router#show ipv6 rip database

Answer: A


Question No: 18

Which statement is true about the command ipv6 ospf 1 area 0?

A. It must be issued in router global configuration mode to enable the OSPF process for IPv6.

B. It must be issued in interface configuration mode to enable the OSPF process for IPv6.

C. It must be issued before the network command to enable the OSPF process for IPv6.

D. It must be issued after the network command to enable the OSPF process for IPv6.

Answer: B


Question No: 19

What is the purpose of configuring the router as a PPPoE client?

A. to provide VPN access over L2TP

B. to enable PPP session from the router to the termination device at the headend for metroEthernet connectivity

C. for DSL connectivity and removing the need for the end-user PC to run the PPPoE client software

D. for connecting the router to a cable modem, which bridges the Ethernet frames from the router to the cable modem termination system

Answer: C

Explanation:

DSL Technology used PPPoE protocol (service provide end) and user end required to be used same Protcol running as client to communicate with it


Question No: 20

A network engineer executes the show ip cache flow command. Wich two types of information are displayed in the report that is generated? (Choose 2)

A. top talkers

B. flow export statistics

C. flow sample for specific protocols

D. MLS flow traffic

E. IP packet distribution

Answer: C,E


Question No: 21

A network engineer wants to baseline the network to determine suitability for real-time voice applications. Which IP SLA operation is best suited for this task?

A. ICMP-echo

B. ICMP-jitter

C. UDP-connect

D. UDP-jitter

E. TCP-connect

F. UDP-echo

Answer: F


Recommend!! Get the Highest Quality 300-101 dumps in VCE and PDF From Certleader, Welcome to download: https://www.certleader.com/300-101-dumps.html (New 436 Q&As Version)