Proper study guides for Latest Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certified begins with Cisco 300 075 vce preparation products which designed to deliver the 100% Correct 300 075 pdf questions by making you pass the 300 075 dump test at your first time. Try the free 300 075 pdf demo right now.

Q31. Which statement about SIP precondition is most correct? 

A. When configuring SIP precondition, the SIP trunk must have access to an RSVP agent. 

B. When configuring SIP precondition, the IP phones must have access to an RSVP agent. 

C. When configuring SIP precondition, the IP phones and SIP trunk must have access to an RSVP agent. 

D. RSVP agents are only required for the IP phones. SIP trunks require RSVP agents only when fall back to local RSVP is configured. 

E. SIP trunk will always require RSVP agents regardless of what RSVP type is configured. 

Answer:


Q32. Refer to the following exhibit. 

Which Cisco IOS SAF Forwarder configuration is correct? 

A. Exhibit A 

B. Exhibit B 

C. Exhibit C 

D. Exhibit D 

Answer:

Explanation: 

Incorrect Answer: B, C, D Summary steps to configure IOS SAF forwarder is given below 

1. enable 

2. configure terminal 

3. router eigrp virtual-instance-name 

4. service-family {ipv4 | ipv6} [vrf vrf-name] autonomous-system autonomous-system-number 

5. topology base 

6. external-client client_label 

7. exit-sf-topology 

8. exit-service-family

9. exit

10. service-family external-client listen {ipv4 | ipv6} tcp_port_number

11. external-client client-label

12. username user-name

13. password password-name 

14. 


Q33. Refer to the exhibit. 

With the Mobile Connect feature configured, when the PSTN phone calls the Enterprise user at extension 3001, the Enterprise user's mobile phone does not ring. Which CSS is responsible for ensuring that the correct partitions are accessed when calls are sent to the Enterprise user's mobile phone? 

A. the gateway CSS 

B. the Phone Device CSS 

C. the Remote Destination Profile CSS 

D. the Remote Destination Profile Rerouting CSS 

E. the Phone Line (DN)CSS 

Answer:

Explanation: 

Incorrect Answer: A, B, C, E 

Ensure that the gateway that is configured for routing mobile calls is assigned to the partition that belongs to the Rerouting Calling Search Space. Cisco Unified Communications Manager determines how to route calls based on the remote destination number and the Rerouting Calling Search Space. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmfeat/fsmobmgr .html 


Q34. Refer to the exhibit. 

The H.323 Gateway is showing status “unknown”. Which statement is true? 

A. The gateway must be reset in Cisco Unified Communications Manager. 

B. The no gateway command followed by the gateway command must be issued in Cisco IOS. 

C. The mgcp commands must be removed. 

D. H.323 gateways do not register with Cisco Unified Communications Manager H.323 gateways always show status "Unknown". 

E. VUAN 1 20 may be down and so the H.323 gateway appears offline to the Cisco Unified Communications Manager 

Answer:

Explanation: 

Incorrect Answer: A, B, C, E 

After a gateway is registered with Cisco Unified Communications Manager, gateway registration status may display in Cisco Unified Communications Manager Administration as unknown. 

Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06gtway. html 


Q35. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

Movi Failure 

Movi Settings 

CIPTV Topo 

Subzone 

Links 

Pipe 

A third collaboration call fails between the backbone site and the HQ site. After reviewing the exhibits, which of the following reasons could be causing this failure? 

A. Not enough bandwidth has been allocated. 

B. Device Pool. 

C. Location. 

D. The pipe is not functioning. 

Answer:

Explanation: 

Based on the exhibit, each call is limited to no more than 128kbps per call, but the total available bandwidth is set to 256 kbps. This will allow the first to calls to go through, but there will be no more available bandwidth for the third call. 


Q36. Which action configures the registration of transcoder resources? 

A. Cisco IOS software registers transcoder resources with SIP. 

B. Cisco IOS software registers transcoder resources with SCCP. 

C. Cisco IOS software registers transcoder resources with H.323. 

D. Cisco IOS software does not register transcoder resources. 

Answer:


Q37. When you configure QoS on VCS, which settings do you apply if traffic through the VCS should be tagged with DSCP AF41? 

A. Set QoS mode to DiffServ and tag value 32. 

B. Set QoS mode to IntServ and tag value to 34. 

C. Set QoS mode to DiffServ and tag value 34. 

D. Set QoS mode to IntServ and tag value to 32. 

E. Set QoS mode to ToS and tag value to 32. 

Answer:


Q38. With Cisco Extension Mobility, when a user logs in to a phone type which has no user device profile, what will happen to the phone? 

A. The phone takes on the default clusterwide device profile. 

B. The phone creates a new device profile automatically. 

C. The phone immediately logs the user off. 

D. The phone crashes and reboots. 

Answer:


Q39. Refer to the exhibit. 

How many calls are permitted by the RSVP configuration? 

A. one G.711 call 

B. two G.729 calls 

C. one G.729 call and one G.711 call 

D. eight G.729 calls 

E. four G.729 calls 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E In performing location bandwidth calculations for purposes of call admission control, Cisco Unified Communications Manager assumes that each call stream consumes the following amount of bandwidth: 

.G.711 call uses 80 kb/s. 

.G.722 call uses 80 kb/s. 

.G.723 call uses 24 kb/s. 

.G.728 call uses 26.66 kb/s. 

.G.729 call uses 24 kb/s. 

Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wpxref28640 


Q40. Which three configuration settings are included in a default region configuration? (Choose three.) 

A. Audio Codec 

B. Video Call Bandwidth 

C. Link Loss Type 

D. Location Description 

E. Immersive Bandwidth 

F. Real Time Protocol 

Answer: A,B,C