Exam Code: cisco 300 075 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)
Certification Provider: Cisco
Free Today! Guaranteed Training- Pass 300 075 pdf Exam.

Q21. Refer to the exhibit. 

Which configuration elements must match for adjacent neighbors to establish a SAF neighbor relationship? 

A. the label name specified in the router eigrp command 

B. the autonomous-system number specified in the service-family ipv4 autonomous-system command 

C. the sf-interface configuration 

D. the topology base configurations 

E. the label name specified in the router eigrp command and the autonomous-system number 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E service-family ipv4 autonomous-system 1 enables a Cisco SAF service family for the specified autonomous system on the router Link: 

http://www.cisco.com/en/US/docs/ios/saf/configuration/guide/saf_cg_ps10591_TSD_Products_Configuration_Guide_Chapter.html#wp1056363 


Q22. A Cisco Unified Communications Manager cluster is installed in headquarters only. 

How can international calls be blocked while national calls are allowed for branch office Cisco IP Phones during a WAN failure? 

A. Configure CSS and partitions in Cisco Unified Communications Manager and apply the CSS and partitions to the SRST ISR. 

B. Configure CSS and partitions in the SRST ISR. 

C. Configure COR in the SRST ISR. 

D. Configure voice translations in the SRST ISR. 

Answer:


Q23. What is the purpose of configuring a hardware-based MTP when deploying Cisco Unified Communications Manager? 

A. to allow for supplementary services such as hold, transfer, and conferencing 

B. when you need support for up to 24 MTP sessions on the same server and 48 on a separate server 

C. when you need the ability to grow support by using DSPs 

D. when you want to only use Cisco Unified Communications Manager resources 

Answer:


Q24. Which two options must be selected in the SIP Trunk Security Profile configuration between Cisco Unified Communications Manager and Expressway? (Choose two) 

A. Enable application-level authorization 

B. Accept presence subscription 

C. Accept out-of-dialog refer 

D. Accept unsolicited notification 

E. Accept replaces header 

F. Transmit security status 

G. Allow charging header 

Answer: D,E 


Q25. Which remote-site redundancy technology fails over to POTS dial peers from the Cisco Unified Communications Manager dial plan during a WAN failure? 

A. MGCP fallback 

B. H.323 fallback 

C. SCCP fallback 

D. SIP fallback 

Answer:


Q26. Which two configurations can you perform to allow Cisco Unified Communications Manager SIP trunks to send an offer in the INVITE? (Choose two.) 

A. Enable the Media Termination Point Required option on the SIP trunk. 

B. Enable the Early Offer Support for Voice and Video Calls option on the SIP profile. 

C. Select the Display IE Delivery check box in the gateway configuration. 

D. Select the Enable Inbound FastStart check box on the Cisco Unified Communications Manager servers. 

E. Select the SRTP Allowed check box on the SIP trunk. 

F. Execute the isdn switch-type primary-ni command globally. 

Answer: A,B 


Q27. A voice-mail product that supports only the G.711 codec is installed in headquarters. 

Which action allows branch Cisco IP phones to function with voice mail while using only the G.729 codec over the WAN link to headquarters? 

A. Configure Cisco Unified Communications Manager regions. 

B. Configure transcoding within Cisco Unified Communications Manager. 

C. Configure transcoding resources in Cisco IOS and assign to the MRGL of Cisco IP phones. 

D. Configure transcoder resources in the branch Cisco IP phones. 

Answer:


Q28. Assume that local route groups are configured. When an IP phone moves from one device mobility group to another, which two configuration components are not changed? (Choose two.) 

A. IP subnet 

B. user settings 

C. SRST reference 

D. region 

E. phone button settings 

Answer: B,E 

Explanation: 

Incorrect Answer: A, C, D Although the phone may have moved from one subnet to another, the physical location and associated services have not changed. Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmfeat/fsdevmob.html#wp1137460 


Q29. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DNS Servers 

Device Pool 

Expressway 

ILS 

Locations 

MRA 

Speed Dial 

SIP Trunk 

Which three configuration tasks need to be completed on the router to support the registration of Cisco Jabber clients? (Choose three.) 

A. The DNS server has the wrong IP address. 

B. The internal DNS Service (SRV) records need to be updated on the DNS Server. 

C. Flush the DNS Cache on the client. 

D. The DNS AOR records are wrong. 

E. Add the appropriate DNS SRV for the Internet entries on the DNS Server. 

Answer: B,C,E 


Q30. Which option describes the reason that transcoding resources are added in Cisco Unified Communications Manager? 

A. to enable transcoding resources in a Cisco Unified Communications Manager server 

B. to enable Cisco Unified Communications Manager to select the optimal single codec for end-to-end calls 

C. to enable transcoding resources in Cisco IP Phones 

D. to provide transcoding resources in Cisco IOS gateways to Cisco Unified Communications Manager 

Answer: