Printable of cisco 300 075 exam materials and questions pool for Cisco certification for consumer, Real Success Guaranteed with Updated 300 075 ciptv2 pdf dumps vce Materials. 100% PASS Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam Today!

Q1. Which three tests can you perform to verify redundancy in the customer environment? (Choose three.) 

A. Verify that all phones are registered to a second subscriber server. 

B. Verify that media resources fail over to a secondary subscriber server when the publisher fails. 

C. Verify that Cisco Unified IP phones running SCCP go into SRST mode when the WAN connection is disconnected. 

D. Verify that HSRP is active on the Cisco Unified Communications Manager subscriber servers. 

E. Verify that the H.323 redundant connection is active. 

F. Verify that SCCP fallback is configured in Cisco Unified Communications Manager. 

Answer: A,B,C 


Q2. The relationship between a Region and a Location is that the Region codec parameter is used between a Region and its configured Locations. 

A. TRUE 

B. FALSE 

Answer:

Explanation: 

Locations work in conjunction with regions to define the characteristics of a network link. Regions define the type of compression (G.711, G.722, G.723, G.729, GSM, or wideband) that is used on the link, and locations define the amount of available bandwidth for the link Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wp1033331 


Q3. Which device is used to connect to the H.323 gatekeeper? 

A. H.323 gateway 

B. SIP trunk 

C. H.323 trunk 

D. MGCP gateway 

Answer:


Q4. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

SX20 System Information 

DX650 Configuration 

MRGL 

DP 

Locations 

AARG 

CSS 

Movi Failure 

Movi Settings 

Which device configuration option will allow an administrator to assign a device to specific rights for making calls to specific DNs? 

A. Media Resource Group List 

B. Device Pool 

C. Location 

D. AAR Group 

E. Calling Search Space 

Answer:

Explanation: 

A partition comprises a logical grouping of directory numbers (DNs) and route patterns with similar reachability characteristics. Devices that are typically placed in partitions include DNs and route patterns. These entities associate with DNs that users dial. For simplicity, partition names usually reflect their characteristics, such as "NYLongDistancePT," "NY911PT," and so on. A calling search space comprises an ordered list of partitions that users can look at before users are allowed to place a call. Calling search spaces determine the partitions that calling devices, including IP phones, softphones, and gateways, can search when attempting to complete a call. 


Q5. Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information? 

A. location controller 

B. route pattern 

C. route string 

D. URI 

Answer:


Q6. During device failover to the secondary Cisco Unified Communications Manager server, how does the phone recognize that the primary server is back? 

A. The secondary server keeps sending keepalive message to the primary server and when it succeeds, it unregisters the phones to force them to register to the primary. 

B. When the primary server goes online, it sends out an "ALIVE" message via broadcast so that the phones re-register. 

C. The phones never re-register with the primary server until the active (secondary) one goes down. 

D. The phone sends keepalive messages to the primary server frequently and when it succeeds, the phone re-registers with it. 

Answer:


Q7. When an incoming PSTN call arrives at an MGCP gateway, how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager? 

A. Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway. 

B. Normalization is done using route patterns. 

C. Normalization is done using the gateway incoming called party prefixes based on number type. 

D. Normalization is done using the gateway incoming calling party prefixes based on number type. 

E. Normalization is achieved by local route group that is assigned to the MGCP gateway. 

Answer:


Q8. Where do you specify the device mobility group and physical location after they have been configured? 

A. phones 

B. DMI 

C. device mobility CSS 

D. device pool 

E. MRGL 

F. locale 

Answer:

Explanation: 

Incorrect Answer: A, B, C, E Before you configure a device pool, you must configure the following items if you want to choose them for the device pool, Cisco Unified Communications Manager group (required), Date/time group (required). Region (required) , SRST reference (optional). Media resource group list (optional), Calling search space for auto-registration (optional). Reverted call focus priority (optional), Device mobility group (optional), Device mobility calling search space, Physical location (optional). Location, AAR group. AAR calling search space. Link: 

https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b02devpl.ht ml 


Q9. Refer to the exhibit. 

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. 

Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. 

How many route lists and route groups should be configured for AAR at a minimum? 

A. a single route list with a local route group for each site 

B. two route lists and two route groups for each site 

C. a single route list and four route groups for each site 

D. None. The AAR CSS can point directly to the route pattern. 

Answer:


Q10. When a call is made from a video endpoint to a Cisco TelePresence EX90 that is registered to a Cisco VCS Control, which portion of the destination URI is the first match that is attempted? 

A. the full URI, including the domain portion 

B. the destination alias, without the domain portion 

C. the E.164 number that is assigned to the Cisco TelePresence EX90 

D. the directory number that is assigned to the Cisco TelePresence EX90 

Answer: