It is impossible to pass Cisco 300 075 ciptv2 exam without any help in the short term. Come to Pass4sure soon and find the most advanced, correct and guaranteed Cisco 300 075 pdf practice questions. You will get a surprising result by our Renew Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) practice guides.

Q111. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

Movi Failure 

Movi Settings 

CIPTV Topo 

Subzone 

Links 

Pipe 

Both of the Cisco TelePresence Video for Windows clients are able to log into the server but can’t make any calls. After reviewing the exhibits, which of the following reasons could be causing this failure? 

A. Wrong username and/or password. 

B. Wrong SIP domain name. 

C. The TMSPE is not working. 

D. The bandwidth is incorrectly configured. 

Answer:


Q112. A Cisco 3825 needs to be added in Cisco Unified Communications Manager as an H.323 gateway. What should the gateway type be? 

A. H.323 gateway 

B. Cisco 3825 

C. Cisco 3800 series router. The specific model will be selected after the Cisco 3800 is selected. 

D. The gateway can be added either as an H.323 gateway or Cisco 3800 series router. 

E. The gateway can be added either as an H.323 gateway or Cisco 3825 series router. 

Answer:


Q113. Which symbol is required for globalized call routing? 

A. + 

B. * 

C. % 

D. / 

E. ; 

Answer: A


Q114. Refer to the exhibit. 

Which configuration change is needed to enable NANP international dialing during MGCP fallback? 

A. Change the dial peer to dial-peer voice 901 voip. 

B. Change the dial peer to dial-peer voice 9011 pots. 

C. Add the command prefix 011 to the dial peer. 

D. Add the command prefix 9011 to the dial peer. 

Answer:


Q115. Which two options must be selected in the SIP Trunk Security Profile configuration between Cisco Unified Communications Manager and Expressway? (Choose two) 

A. Enable application-level authorization 

B. Accept presence subscription 

C. Accept out-of-dialog refer 

D. Accept unsolicited notification 

E. Accept replaces header 

F. Transmit security status 

G. Allow charging header 

Answer: D,E 


Q116. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

Movi Failure 

Movi Settings 

CIPTV Topo 

Subzone 

Links 

Pipe 

What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two.) 

A. Incorrect username and password 

B. Wrong SIP domain configured. 

C. User is not associated with the device. 

D. IP or DNS name resolution issue. 

E. CSF Device is not registered. 

F. IP Phone DN not associated with the user. 

Answer: B,D 


Q117. Refer to the exhibit. 

Locations-based CAC has been configured between HQ and the BR site. Assume that the priority queue has been provisioned correctly for three G.729 calls. What happens when 

the fourth call is placed from HO to BR? 

A. The call will get through via the WAN. But it will experience poor audio quality. 

B. The call will fail. 

C. The call will be queued until one of the existing calls drop. 

D. The call will get through without any issues. 

Answer:


Q118. Which statement best describes globalized call routing in Cisco Unified Communications Manager? 

A. All incoming calling numbers on the phones are displayed as an E.164 with the + prefix. 

B. Call routing is based on numbers represented as an E.164 with the + prefix format. 

C. All called numbers sent out to the PSTN are in E.164 with the + prefix format. 

D. The CSS of all phones contain partitions assigned to route patterns that are in global format. 

E. All phone directory numbers are configured as an E.164 with the + prefix. 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E For the destination to be represented in a global form common to all cases, we must adopt a global form of the destination number from which all local forms can be derived. The + sign is the mechanism used by the ITU's E.164 recommendation to represent any PSTN number in a global, unique way. This form is sometimes referred to as a fully qualified PSTN number. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/dialplan.html#wp1153205 


Q119. Which statement is not true about GARP? 

A. GARP attacks require access to the target LAN or VLAN. 

B. GARP can be used for a man-in-the-middle attack. 

C. GARP is normally used for HSRP. 

D. GARP can be disabled at Cisco IP phones. 

Answer:

Explanation: 

Incorrect Answer: A, B, D 

GARP (Gratuitous ARP) announce the presence of IP Phone on the network. 

Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/security/4_0_1/secuphne.html 


Q120. The following exhibit shows configs for H.323 gateway. You have been asked to implement TEHO from a remote branch office with area code 301 to the HQ office with area code 201 using Cisco Unified Communications Manager. The remote office has an MGCP gateway and the HQ office has an H.323 gateway. Once the call arrives at the HQ, it should break out to the PSTN as a seven-digit local call. Which statement about the route pattern is true? 

A. route pattern should be 91201.[2-9]XXXXXX with Discard Digit as Predot and Prefix 9 

B. route pattern should be 91201.[2-9]XXXXXX with Discard Digit as Predot 

C. route pattern should be 91201.[2-9]XXXXXX 

D. route pattern should be 9.1201[2-9]XXXXXX with Discard Digit as Predot 

E. route pattern should be 9.1201[2-9]XXXXXX with Discard Digit as Predot and Prefix 9 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E 

Destination pattern is 91, HQ office area code is 201 .