Act now and download your Cisco cisco 300 075 test today! Do not waste time for the worthless Cisco 300 075 vce tutorials. Download Far out Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam with real questions and answers and begin to learn Cisco 300 075 vce with a classic professional.

Q101. Refer to the exhibit. 

Assume that NANP is being used and 9 is used for PSTN access code Long distance national calls are preceded with 1. 

How should the HQ Cisco Unified Communications Manager be configured for calls to 3XXX to be sent to the gatekeeper at 1 0 1 6 1 with PSTN backups? 

A. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains the MGCP gateway with prefix digits 1 408555 for the outgoing called number. 

B. Configure a route pattern for 1#3XXX Assign this route pattern to a route list that points to a route group that lists the H 225 trunk as first choice and the MGCP gateway as a second choice. 

C. Configure a route pattern for 4085543XXX. Assign this route pattern to a route list that points to two route groups. The first route group contains the H 226 trunk The second route group contains MGCP gateway. 

D. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains MGCP gateway with prefix digits 91 408554 for the called number. 

Answer:

Explanation: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b03rtgrp.html #wpxref46617 


Q102. Refer to the exhibit. 

What should the destination IP address be configured as on the HQ and BR1 SIP trunks? 

A. The HQ SIP trunk destination IP address should be 10.1.6.10. The BR1 SIP trunk destination IP address should be 10.1.5.10. 

B. The destination IP address is not configurable. Each cluster will learn about the remote trunk IP address through SAF learned routes. 

C. The destination IP address will be learned automatically and configured on the SIP trunks after the Cisco Unified Communications Managers discover themselves. 

D. The HQ SIP trunk destination IP address should be the HQ SAF Forwarder IP address. The BR1 SIP trunk destination IP address should be the BR1 SAF Forwarder IP address. 

Answer:

Explanation: 

Incorrect Answer: A, C, D 

The gatekeeper changes the IP address of this remote device dynamically to reflect the IP address of the remote device. 

Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08trnk.html 


Q103. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

SRST 

SRST-BR2 Config 

BR2 Config 

SRSTPSTNCall 

Which device configuration option will allow an administrator to control bandwidth between calls placed between branches? 

A. Media Resource Group List 

B. Device Pool 

C. Location 

D. AAR Group 

E. Regions 

Answer:

Explanation: 

In Cisco Unified Communications Manager Administration, use the System > Location Info menu path to configure locations. Use locations to implement call admission control in a centralized call-processing system. Call admission control enables you to regulate audio quality and video availability by limiting the amount of bandwidth that is available for audio and video calls over links between the locations 


Q104. Which Cisco IOS command is used for internal SAF Clients to check SAF learned routes? 

A. show eigrp address-family ipv4 saf 

B. show voice saf routes 

C. show voice saf detail 

D. show eigrp service-family ipv4 saf 

E. show voice saf dndb all 

Answer:

Explanation: 

Incorrect Answer: A, B, C, D Router# show voice saf dnDb all Total no. of patterns in db/max allowed : 1/6000 Patterns classified under dialplans (private/global) : 0/1 Informational/Error stats -Patterns w/ invalid expr detected while add : 0 Patterns duplicated under the same instance : 0 Patterns rejected overall due to max capacity : 0 Attempts to delete a pattern which is invalid : 0 

Last successful DB update @ 2009:12:14 15:42:45:967 Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/feature/guide/SAF_FeatureModule.html#wp1201815 


Q105. Which option indicates the best QoS parameters for interactive video? 

A. 1% Max Loss, 150 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning 

B. 5% Max Loss, 5 s One-way Latency, 30 ms Jitter, 20% Overprovisioning 

C. 0% Max Loss, 100 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning 

D. 1% Max Loss, 160 ms One-way Latency, 60 ms Jitter, 10% Overprovisioning 

Answer:


Q106. Which two statements about symmetric encryption are true? (Choose two.) 

A. With symmetric encryption, the encryption key equals the decryption key. 

B. Symmetric encryption is commonly used to sign asymmetric keys. 

C. Symmetric encryption is a good choice for real-time encryption of bulk data. 

D. Symmetric encryption uses asymmetric keys. 

Answer: A,C 

Explanation: 

Incorrect Answer: B, D There are two basic techniques for encrypting information: symmetric encryption (also called secret key encryption) and asymmetric encryption (also called public key encryption.) in symmetric key As long as both sender and recipient know the secret key, they can encrypt and decrypt all messages that use this key. A public key is made freely available to anyone who might want to send you a message. A second, private key is kept secret, so that only you know it. Link: 

http://support.microsoft.com/kb/246071 


Q107. Which command can be used to manually send the MGCP gateway to register with the secondary Cisco Unified Communications Manager server? 

A. ccm-manager switchover-to-backup 

B. mgcp use backup 

C. ccm-manager register backup 

D. not supported 

Answer:


Q108. With Cisco Extension Mobility, when a user logs in to a phone type which has no user device profile, what will happen to the phone? 

A. The phone takes on the default clusterwide device profile. 

B. The phone creates a new device profile automatically. 

C. The phone immediately logs the user off. 

D. The phone crashes and reboots. 

Answer:


Q109. When you configure QoS on VCS, which settings do you apply if traffic through the VCS should be tagged with DSCP AF41? 

A. Set QoS mode to DiffServ and tag value 32. 

B. Set QoS mode to IntServ and tag value to 34. 

C. Set QoS mode to DiffServ and tag value 34. 

D. Set QoS mode to IntServ and tag value to 32. 

E. Set QoS mode to ToS and tag value to 32. 

Answer:


Q110. Which two locations are the best locations that an end user can use to determine if an IP phone is working in SRST mode? (Choose two.) 

A. Cisco Unified Communications Manager Administration 

B. IP phone display 

C. Cisco Unified SRST Router 

D. Cisco Unified MGCP Fallback Router 

E. physical IP phone settings 

Answer: B,E 

Explanation: 

Incorrect Answer: A, C, D IP Phone display and Physical phone IP settings are two locations were an end user can determine if an IP phone is working in SRST mode. Link: http://my.safaribooksonline.com/book/telephony/1587050757/survivable-remote-site-telephony-srst/529