Cause all that matters here is passing the Cisco 300 075 ciptv2 exam. Cause all that you need is a high score of 300 075 pdf Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam. The only one thing you need to do is downloading Pass4sure 300 075 pdf exam study guides now. We will not let you down with our money-back guarantee.

Q71. Refer to the exhibit. 

All HQ phones are configured to use HQ_MRGL and all BR phones are configured to use BR_MRGL. For the HQ phones always to use the hardware conference bridge as a first choice, which configuration should be implemented? 

A. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. Ensure that the instance ID for the hardware conference bridge is 0. 

B. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. The hardware conference bridge must be configured first. 

C. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Add both the HQ_MRG and HQ_MRG_2 to the HQ_MRGL and list the HQ_MRG first. 

D. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Configure an additional HQ_MRGL_2. Add the HQ_MRG to HQ_MRGL. Add HQ_MRG_2 to HQ_MRGL_2. The HQ_MRGL should be assigned to the HQ phones. The HQ_MRGL_2 should be assigned to the HQ device pool. 

Answer:

Explanation: 

Expiation: 

To ensure that the hardware bridge is utilized first with all its resources BEFORE the software bridge is used … you need to have two separate MRG’s and list the hardware MRG 1st in the MRGL … 


Q72. Which three configuration settings are included in a default region configuration? (Choose three.) 

A. Audio Codec 

B. Video Call Bandwidth 

C. Link Loss Type 

D. Location Description 

E. Immersive Bandwidth 

F. Real Time Protocol 

Answer: A,B,C 


Q73. Refer to the exhibit. 

What must be configured on the HQ Cisco Unified Communications Manager to allow HQ users to dial the SAF learned directory number pattern 3XXX? 

A. Route pattern 3XXX should be configured and made available to HQ users through the phone CSS. 

B. Route pattern 3XXX should be configured and made available to HQ phone users through the phone AAR CSS. 

C. The SAF partition assigned to the SAF learned patterns must be available to the HQ phone users through the phone CSS. 

D. The SAF partition assigned to the SAF learned patterns must be available to the HQ phone users through the phone AAR CSS. 

E. The SAF directory number pattern 3XXX will be made available to all users automatically as soon as the SAF partition is selected. 

Answer:

Explanation: 

Incorrect Answer: A, B, D By adopting the SAF network service, the call control discovery feature allows Cisco Unified Communications Manager to advertise itself along with other key attributes. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fscallcontrol discovery.html 


Q74. Refer to the exhibit. 

How does the Cisco Unified Communications Manager advertise dn-block 2? 

A. 14087071222 with number type international 

B. +14087071222 with number type international 

C. +14087071222 

D. 14087071222 

Answer:


Q75. What command is used to map internal extensions to the corresponding E.164 PSTN number when using Cisco Unified Communications Manager Express in SRST mode? 

A. ephone-dn 

B. dialplan-pattern 

C. number 

D. number-e.164 

E. ephone-transnumber 

Answer:


Q76. Refer to the exhibit. 

What should the destination IP address be configured as on the HQ and BR1 SIP trunks? 

A. The HQ SIP trunk destination IP address should be 10.1.6.10. The BR1 SIP trunk destination IP address should be 10.1.5.10. 

B. The destination IP address is not configurable. Each cluster will learn about the remote trunk IP address through SAF learned routes. 

C. The destination IP address will be learned automatically and configured on the SIP trunks after the Cisco Unified Communications Managers discover themselves. 

D. The HQ SIP trunk destination IP address should be the HQ SAF Forwarder IP address. The BR1 SIP trunk destination IP address should be the BR1 SAF Forwarder IP address. 

Answer:

Explanation: 

Incorrect Answer: A, C, D 

The gatekeeper changes the IP address of this remote device dynamically to reflect the IP address of the remote device. 

Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08trnk.html 


Q77. In a Cisco Unified Communications Manager centralized call processing model, what is the best CAC method recommended for this type of deployment? 

A. QoS-based 

B. location-based 

C. RSVP-based 

D. region-based 

E. gateway-based 

F. gatekeeper-based 

Answer:


Q78. The following exhibit shows configs for H.323 gateway. You have been asked to implement TEHO from a remote branch office with area code 301 to the HQ office with area code 201 using Cisco Unified Communications Manager. The remote office has an MGCP gateway and the HQ office has an H.323 gateway. Once the call arrives at the HQ, it should break out to the PSTN as a seven-digit local call. Which statement about the route pattern is true? 

A. route pattern should be 91201.[2-9]XXXXXX with Discard Digit as Predot and Prefix 9 

B. route pattern should be 91201.[2-9]XXXXXX with Discard Digit as Predot 

C. route pattern should be 91201.[2-9]XXXXXX 

D. route pattern should be 9.1201[2-9]XXXXXX with Discard Digit as Predot 

E. route pattern should be 9.1201[2-9]XXXXXX with Discard Digit as Predot and Prefix 9 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E 

Destination pattern is 91, HQ office area code is 201 . 


Q79. While configuring Call Survivability in Cisco Unified Communications Manager, what step is mandatory to reach remote sites while in SRST mode? 

A. Enable Cisco Remote Site Reachability. 

B. Configure CFUR. 

C. Enable the SRST checkbox in the MGCP gateway. 

D. Configure the H.323 gateway for SRST in Cisco Unified Communications Manager. 

E. Enable the Failover Service parameter. 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E Call Forward Unregistered (CFUR) functionality provides the automated rerouting of calls through the PSTN when an endpoint is considered unregistered due to a remote WAN link failure Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/models.html 


Q80. Which command can be used to manually send the MGCP gateway to register with the secondary Cisco Unified Communications Manager server? 

A. ccm-manager switchover-to-backup 

B. mgcp use backup 

C. ccm-manager register backup 

D. not supported 

Answer: