Proper study guides for Up to the immediate present Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certified begins with Cisco 300 075 vce preparation products which designed to deliver the Validated cisco 300 075 questions by making you pass the 300 075 dump test at your first time. Try the free 300 075 dump demo right now.
Q61. Which statement is true when device mobility mode is enabled or disabled in the Phone
A. The device mobility mode phone settings take precedence over the service parameter settings.
B. The service parameter settings take precedence over the device mobility mode phone settings.
C. The combined service parameter settings and the device mobility mode phone settings will be used.
D. The default settings will be used due to the conflicts.
Q62. Which two options must be selected in the SIP Trunk Security Profile configuration between Cisco Unified Communications Manager and Expressway? (Choose two)
A. Enable application-level authorization
B. Accept presence subscription
C. Accept out-of-dialog refer
D. Accept unsolicited notification
E. Accept replaces header
F. Transmit security status
G. Allow charging header
Q63. Refer to the exhibit.
HQ_MRGL is assigned to the HQ IP phones. BR_MRGL is assigned to the BR IP phones. The remote site BR IP phones support only the G.711 codec. Where should the transcoder reside?
A. The transcoder should reside at the HQ site and assigned to HQ_MRG.
B. The transcoder should reside at the BR site and assigned to BR_MRG.
C. The transcoder should be assigned to its own MRG, which should then be assigned to the default device pool.
D. A transcoder is not needed. The HQ phones will automatically change over to the G.711 codec.
Q64. When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished?
A. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI.
B. In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns.
C. Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns.
D. In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls.
Incorrect Answer: A, B, D calling party transformation mask value is Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character +. Link:
Q65. What is the default DSCP/PHB for TelePresence video conferencing packets in Cisco Unified Communications Manager?
There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
Both of the Cisco TelePresence Video for Windows clients are able to log into the server but can’t make any calls. After reviewing the exhibits, which of the following reasons could be causing this failure?
A. Wrong username and/or password.
B. Wrong SIP domain name.
C. The TMSPE is not working.
D. The bandwidth is incorrectly configured.
Q67. Which two statements are true regarding the implementation of globalized call-routing in terms of localized call egress? (Choose two.)
A. Calling-party numbers are routed from the gateway or trunks to phones.
B. Called-party numbers are routed from the gateway or trunks to phones.
C. Calling-party numbers of internal calls are routed from the gateway or trunks.
D. Calling-party calls are routed to the gateway and trunks.
Q68. You are the Cisco Unified Communications Manager in Certpaper.com. You use a remote site MGCP gateway to provide redundancy when connectivity to the central Cisco Unified Communications Manager cluster is lost. How to enable IP phones to establish calls to the PSTN when they have registered with the gateway? (Choose three.)
A. POTS dial peers must be added to the gateway to route calls from the IP phones to the PSTN.
B. The default service must be enabled globally.
C. The command ccm-manager mgcp-fallback must be configured.
D. COR needs to be configured to disallow outbound calls.
Incorrect Answer: D Class of restriction: Cisco Unified Communications Manager Business Edition 3000 supports class of service (CoS) with respect to geographic reach as follows:
– Emergency services
. Call waiting
. Default ringtones
. Speed dials: Single-button, not BLF
Q69. Which symbol is required for globalized call routing?
Q70. Which minimum configuration is needed for the SAF Internal Client to register with this SAF Forwarder?
A. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service safprofile trunk-route 1session protocol sip interface Loopbackl transport tcp port 5060i
B. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service safprofile trunk-route 1session protocol sip interface Loopbackl transport tcp port 5060!profile dn-block 1 alias-prefix 1972555pattern 1 type extension 4xxx!profile callcontrol 1dn-servicetrunk-route 1dn-block 1dn-block 2i
C. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service safprofile trunk-route 1session protocol sip interface Loopbackl transport tcp port 5060!profile dn-block 1 alias-prefix 1972555pattern 1 type extension 4xxx!profile callcontrol 1dn-servicetrunk-route 1dn-block 1dn-block 2!channel 1 vrouter SAF asystem 1subscribe callcontrol wildcardedpublish callcontrol 1i
D. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service saf!channel 1 vrouter SAF asystem 1
E. router eigrp SAF!service-family ipv4 autonomous-system 1!topology base exit-sf-topologyexit-service-family i