It is impossible to pass Cisco 210-065 exam without any help in the short term. Come to Exambible soon and find the most advanced, correct and guaranteed Cisco 210-065 practice questions. You will get a surprising result by our Improved Implementing Cisco Video Network Devices v1.0 practice guides.

Q41. When connecting to a pan-tilt-zoom camera to a C-Series codec, what type of cable must be used for camera control? 

A. an Ethernet crossover cable (RJ45-to-RJ45) 

B. an Ethernet cable (RJ45-to-RJ45) 

C. a serial cable (DB25-to-DB9) 

D. a VISCA cable (DB9-to-RJ45) 

Answer:


Q42. Which of these needs to be enabled in Cisco Unified Communications Manager in order for the Cisco TelePresence System 500-32 to be able to share a presentation with a Cisco TelePresence System Codec C40 endpoint that is registered to a VCS? 

A. Allow iX application media 

B. Send send-receive SDP in mid-call invite 

C. Allow presentation sharing using BFCP 

D. Allow presentation sharing using H.235 

E. Deliver conference bridge identifier 

Answer:


Q43. An immersive video room requires acoustic remediation because there is noticeable reverb present. What type of acoustic paneling does Cisco recommend to provide remediation? 

A. NRC rating greater than 0.75 

B. NRC rating greater than 0.5 

C. NRC rating less than 0.75 

D. NRC rating less than 0.5 

Answer:


Q44. Refer to the exhibit. 

A technician is reviewing the search history details on a Cisco TelePresence VCS for a recent call that failed. What was the cause for the call setup failure? 

A. A local call policy rule denied the call. 

B. The source alias matched an entry in the registration deny list. 

C. The originating caller was not authenticated. 

D. The source alias origin is unknown. 

Answer: A


Q45. What is the main difference between a Cisco TelePresence Multipoint Control Unit and a Cisco TelePresence Multipoint Switch? 

A. The Cisco TelePresence Multipoint Control Unit is a hardware bridge. The Cisco TelePresence Multipoint Switch is a software bridge. 

B. The Cisco TelePresence Multipoint Control Unit is a software bridge for immersive and non-immersive endpoints. The Cisco TelePresence Multipoint Switch is a hardware bridge for non-immersive endpoints. 

C. The Cisco TelePresence Multipoint Control Unit delivers automatic voice-activated switching. The Cisco TelePresence Multipoint Switch provides active presence. 

D. The Cisco TelePresence Multipoint Control Unit has a latency of less than 10 ms, whereas the Cisco TelePresence Multipoint Switch has a latency of 100 ms. 

Answer:


Q46. Refer to the exhibit. 

Management would like to find out when a particular multipoint control unit feature was enabled and who enabled it. Which menu option is the most appropriate when searching for that information? 

A. Event Display Filter 

B. Audit Log 

C. Event Log 

D. Syslog 

Answer:


Q47. A network engineer wants to perform a factory reset on a Cisco TelePresence MX device from the CLI. Which command should be used? 

A. xConfiguration FactoryReset 

B. xCommand FactoryReset 

C. xCommand SystemUnit FactoryReset 

D. xConfiguration SystemUnit FactoryReset 

Answer:


Q48. A technician is trying to troubleshoot real-time call information from the CLI of a VCS. Which command should the technician enter? 

A. xstatus 

B. xconfiguration 

C. xfeedback 

D. xhistory 

E. xcommand 

Answer:


Q49. What is the optimum distance for a person sitting using the Cisco TelePresence System 500? 

A. the camera can adjust automatically 

B. 0.5 meters and 0.75 meters (1.5 and 2.5 feet) 

C. 1.2 meters and 1.8 meters (4 and 6 feet) 

D. 3.0 and 5.0 meters (10 and 15 feet) 

Answer:


Q50. What is the main difference between Cisco Jabber and Cisco Jabber Video for TelePresence? 

A. Cisco Jabber registers to the Cisco Unified Communications Manager, whereas Cisco Jabber Video for TelePresence registers to the VCS. 

B. Cisco Jabber Video for TelePresence registers to Cisco Unified Communications Manager, whereas Cisco Jabber registers to the VCS. 

C. Cisco Jabber has no video calling capabilities, whereas Cisco Jabber Video for TelePresence has video capabilities. 

D. Cisco Jabber has no presence capabilities, whereas Cisco Jabber Video for TelePresence has presence capabilities. 

E. There is no difference between Cisco Jabber and Cisco Jabber Video for TelePresence. They should not coexist in the same network. 

Answer: