Q1. In this item, you will need to use all information presented to you to successfully answer the question. 

The Cisco Telepresence Codec C90 is unable to call the Cisco IP Video Phone. Assuming that the calling search space has been configured correctly, which of the these can cause this issue? 

A. The Cisco Telepresence Codec C90 can only be registered to a Cisco Telepresence Video Communication Server. 

B. A multipoint control unit is required in order for the call to work. 

C. The Cisco Telepresence Codec C90 can only be registered as a SIP endpoint to Cisco Unified Communications Manager. H.323 is not supported. 

D. URI dialing has not been configured on Cisco Unified Communications Manager. 

E. The Cisco Telepresence Codec C90 Profile 1 > CallSetupMode must be configured as a gateway since Cisco Unified Communications Manager does not have a gatekeeper functionality. 

F. The Cisco Telepresence Codec C90 is not registered as a SIP endpoint on Cisco Unified Communications Manager. The Cisco Telepresence Codec C90 needs to be registered as both SIP and H.323. 


Q2. Which four features are supported by Cisco TelePresence Server for all hardware models in remotely managed mode? (Choose four.) 

A. auto-attendant 

B. ClearPath 

C. Cluster sizes of more than 5 servers 

D. Cascading 

E. Active presence for all devices 

F. Support for Conductor 

G. Native scheduling capabilities 

Answer: B,D,E,F 

Q3. Which Cisco Video Surveillance product contains the Cisco Video Surveillance Encoding Server? 

A. Video Communications Server 

B. Cisco Video Surveillance Operations Manager 

C. Cisco Video Surveillance Media Server 

D. Cisco Video Surveillance Transcoding and Encoding Server 

E. Cisco Video Surveillance Virtual Matrix 


Q4. Which two of these can cause registration problems for a Cisco TelePresence Codec C40 endpoint running in H.323 mode? (Choose two.) 

A. The IP default gateway address is incorrect for the endpoint. 

B. The H.323 license stack is not added to the endpoint. 

C. The MAC address for the endpoint has not been added to the Cisco TelePresence VCS. 

D. The E.164 H323Alias has not been configured on the endpoint. 

E. The URI address has not been configured on the endpoint. 

Answer: A,D 

Q5. efer to the exhibit. 

Which configuration item shown in the exhibit should be used to assign the internal and external video communication server address for this group of users? 

A. User Settings > Video Address pattern 

B. Administrative Tools > User Settings 

C. Configuration Template > Edit Template 

D. User Import > Configuration 


Q6. Which three features does Cisco VCS provide? (Choose three.) 

A. native Cisco SCCP telephonyi integration 

B. SIP-H.323 interworking functionality 

C. native scheduling 

D. SIP trunk integration with Cisco Unified Communications Manager 

E. third-party standards-based H.323 and SIP device registration 

F. reverse proxy functionality 

Answer: B,D,E 

Q7. Which function does a Cisco TCS recording alias perform? 

A. It links recorded media to a specified output location. 

B. It provides a dialable alias that will trigger a TCS recording workflow. 

C. It sends media to Cisco Medianet. 

D. It provides an alias for the recorded filename. 


Q8. Refer to the exhibit. 

What can be deduced from the log shown in the exhibit, which was taken from a Cisco TelePresence Codec C60? 

A. A direct call to 52902511 is being made. 

B. A Multiway call to multiway221@osl147.local is being made. 

C. No calls are being attempted by the endpoint. 

D. A BFCP call is being initiated. 

E. The endpoint is receiving a call from the VCS. 


Q9. You have been informed from the field that a new Cisco TelePresence video endpoint has been deployed with an IPv4 address of You need to check for connectivity from the Cisco Unified Communications Manager server. Which command should be entered to check for network connectivity? 

A. utils network traceroute newsystem.domain254.local 

B. utils network ping 

C. ping 

D. traceroute 

E. utils network host cucm.osl147.local 


Q10. A network administrator is asked to configure a video conference using the Cisco TelePresence MCU 5300. There is a requirement for participants to start with the same layout when joining the conference. How can this goal be accomplished? 

A. Layouts cannot be customized on the MCU 5300. 

B. Configure a custom layout for each user individually. 

C. Configure a custom layout and apply the layout to all new participants. 

D. Allow each endpoint to configure its own layout.