Q61. RAG DROP 

Answer: 


Q62. An engineer assists a user in configuring an Android device for authentication to an IEEE 802.1x EAP WLAN with PEAPv1. The Phase 2 authentication should be configured as which option? 

A. LEAP 

B. MSCHAPv2 

C. TLS 

D. TTLS 

Answer:


Q63. Refer to the exhibit. In an effort to identify RF characteristics at a customer location, an RF engineer uses the Spectrum Analyzer tool that is shown. Which feature that is native to the Spectrum Analyzer is identified by the exhibit? 

A. Real-Time FFT 

B. Duty Cycle 

C. Max Hold 

D. Time Domain 

Answer:


Q64. Which Cisco program for WLAN client vendors helps to ensure that their devices are interoperable with Cisco WLAN infrastructure? 

A. CCX 

B. CCMP 

C. ASDM 

D. WLSE 

Answer:


Q65. An installation uses a 21dBi parabolic dish. It is connected to the 802.11n radio via low loss antenna coax rated at 4dB loss/100 feet. After testing, it has been determined that 2mW of power will be lost in the cable. An EIRP producing 200mW is desired. What should the transmit power be set to? 

A. 8mW 

B. 3dBm 

C. 3.16mW 

D. 5mW 

Answer:


Q66. Which two algorithms are available in RRM? (Choose two.) 

A. coverage-hole detection 

B. dynamic channel assignment 

C. RSSI normalizer 

D. transmitting channel expander 

E. rogue detection 

Answer: A,B 


Q67. Following the deployment of a wireless network for data and voice services, an engineer is to validate the coverage. Which type of survey is required to ensure coverage? 

A. passive 

B. active 

C. fingerprinting 

D. calibrating 

Answer:


Q68. Which option describes why most wireless phones and tablets do not use 802.11a/n and 40 MHz channels? 

A. a lack of radio range when using these radios 

B. a lack of device battery capacity to operate concurrent a/b/g/n radios 

C. a lack of cooling in the device necessary to operate these radios 

D. These radios would require the devices to be larger. 

Answer:


Q69. On the Cisco Wireless LAN Controller GUI, what sub-menu option under the Command menu will transfer code and configuration files to the controller? 

A. Download File 

B. Upload File 

C. Download Configuration 

D. Upload Configuration 

Answer:


Q70. Which two protocols are available to download or upload files to or from Cisco WLC? (Choose two.) 

A. FTP 

B. TFTP 

C. SCP 

D. HTTP 

E. HTTPS 

Answer: A,B