It is more faster and easier to pass the Check Point 156-915.80 exam by using Precise Check Point Check Point Certified Security Expert Update - R80 questuins and answers. Immediate access to the Rebirth 156-915.80 Exam and find the same core area 156-915.80 questions with professionally verified answers, then PASS your exam with a high score now.

P.S. Precise 156-915.80 prep are available on Google Drive, GET MORE: https://drive.google.com/open?id=1PCXbUMDUo5Er1-inFIcDg5bU0AdcWvrC


New Check Point 156-915.80 Exam Dumps Collection (Question 7 - Question 16)

New Questions 7

You are a Security Administrator who has installed Security Gateway R80 on your network. You need to allow a specific IP address range for a partner site to access your intranet Web server. To limit the partneru2019s access for HTTP and FTP only, you did the following:

1) Created manual Static NAT rules for the Web server.

2) Cleared the following settings in the Global Properties > Network Address Translation screen:

- Allow bi-directional NAT

- Translate destination on client side

Do the above settings limit the partneru2019s access?

A. Yes. This will ensure that traffic only matches the specific rule configured for this traffic, and that the Gateway translates the traffic after accepting the packet.

B. No. The first setting is not applicable. The second setting will reduce performance.

C. Yes. Both of these settings are only applicable to automatic NAT rules.

D. No. The first setting is only applicable to automatic NAT rules. The second setting will force translation by the kernel on the interface nearest to the client.

Answer: D


New Questions 8

Looking at the SYN packets in the Wireshark output, select the statement that is true about NAT.

A. This is an example of Hide NAT.

B. There is not enough information provided in the Wireshark capture to determine the NAT settings.

C. This is an example of Static NAT and Translate destination on client side unchecked in Global Properties.

D. This is an example of Static NAT and Translate destination on client side checked in Global Properties.

Answer: D


New Questions 9

Check Point APIs allow system engineers and developers to make changes to their organizationu2019s security policy with CLI tools and Web Services for all of the following except?

A. Create new dashboards to manage 3rd party task

B. Create products that use and enhance 3rd party solutions.

C. Execute automated scripts to perform common tasks.

D. Create products that use and enhance the Check Point Solution.

Answer: A

Explanation:

Check Point APIs let system administrators and developers make changes to the security policy with CLI tools and web-services. You can use an API to:

Use an automated script to perform common tasks

Integrate Check Point products with 3rd party solutions

Create products that use and enhance the Check Point solution


New Questions 10

MegaCorp is using SmartCenter Server with several gateways. Their requirements result in a heavy log load. Would it be feasible to add the SmartEvent Correlation Unit and SmartEvent Server to their SmartCenter Server?

A. No. SmartCenter SIC will interfere with the function of SmartEvent.

B. No. If SmartCenter is already under stress, the use of a separate server for SmartEvent is recommended.

C. No, SmartEvent and Smartcenter cannot be installed on the same machine at the same time.

D. Yes. SmartEvent must be installed on your SmartCenter Server.

Answer: B


New Questions 11

Fill in the blank. To verify SecureXL statistics, you would use the command .

Answer:

fwaccel stats


New Questions 12

Which process should you debug if SmartDashboard login fails?

A. sdm

B. cpd

C. fwd

D. fwm

Answer: D


New Questions 13

Where can you find the Check Pointu2019s SNMP MIB file?

A. $CPDIR/lib/snmp/chkpt.mib

B. $FWDIR/conf/snmp.mib

C. It is obtained only by request from the TAC.

D. There is no specific MIB file for Check Point products.

Answer: A


New Questions 14

Paul has just joined the MegaCorp security administration team. Natalie, the administrator, creates a new administrator account for Paul in SmartDashboard and installs the policy. When Paul tries to login it fails. How can Natalie verify whether Paulu2019s IP address is predefined on the security management server?

A. Login to Smart Dashboard, access Properties of the SMS, and verify whether Paulu2019s IP address is listed.

B. Type cpconfig on the Management Server and select the option u201cGUI client Listu201d to see if Paulu2019s IP address is listed.

C. Login in to Smart Dashboard, access Global Properties, and select Security Management, to verify whether Paulu2019s IP address is listed.

D. Access the WEBUI on the Security Gateway, and verify whether Paulu2019s IP address is listed as a GUI client.

Answer: B


New Questions 15

Fill in the blank. The user wants to replace a failed Windows-based firewall with a new server running GAiA.

For the most complete restore of an GAiA configuration, he or she will use the command

Answer:

migrate_import


New Questions 16

A snapshot delivers a complete GAiA backup. The resulting file can be stored on servers or as a local file in /var/CPsnapshot/snapshots. How do you restore a local snapshot named MySnapshot.tgz?

A. Reboot the system and call the start menu. Select the option Snapshot Management, provide the Expert password and select [L] for a restore from a local file. Then, provide the correct file name.

B. As expert user, type the command snapshot -r MySnapshot.tgz.

C. As expert user, type the command revert --file MySnapshot.tgz.

D. As expert user, type the command snapshot - R to restore from a local file. Then, provide the correct file name.

Answer: C


P.S. Easily pass 156-915.80 Exam with Dumpscollection Precise Dumps & pdf vce, Try Free: http://www.dumpscollection.net/dumps/156-915.80/ ( New Questions)